New Albany Stormwater

Latex Paint Drying

Latex Paint Drying Instructions

To identify latex paint, read the instructions.
The will indicate that rollers & brusher can be cleaned using soap & water.

  1. Remove lid from paint container.
  2. Add sand or clay-based cat litter to the paint unitl there are equal parts of absorbant and paint. Stir until mixed.
  3. Place the uncovered container in a well-ventilated area until mixture has hardened.
  4. Dispose of uncovered* container with your regular trash.

TIP: When drying out paint form a container that is more than half full, line a sturdy cardboard box with a garbagebag. Alternate between pouring absorbent (sand or catlitter) & paint into the lined box until the paint container is empty**. Stir untill mixed. Finish the process by following steps 3 and 4 from above.

*Leaving the containers uncovered lets the trash hauler now that the paint has been hardened - otherwise it will likely not be picked up.
**Empty paint containers can be disposed of in your regular trash.

 
  • 2015 Pollution Prevention Municipal Training – January 27th
    Mark your calendar for the 2015 Pollution Prevention Municipal Training on January 27th, from 9-11 AM at the Clarksville Community Center. This training event is designed to Train-the-Trainer such as Department Heads, Foremen, and Safety Directors on ways to minimize pollution from entering local waterways during municipal activities, such as salt storage, vehicle fueling and maintenance, and spill response procedures. Continue Reading
  • We’re On Facebook!
    Check out our new Facebook page and Like us! www.facebook.com/siswac

City Links

State & Federal Links

Contact Us

Stormwater Utility:
Joseph Ham
Stormwater Coordinator
812-945-1989
2113 Grant Line Road
New Albany, IN 47150

StormWater billing
812-948-5399
After hours please call
Phil Aldridge
Field Supervisor
812-697-3429
Brandon Sailings
502-558-1507